When we have really bad rain storms, and the wind is blowing from the north, a lot of water somehow gets through the weatherstripping on this back door… I bought a better type of door weatherstrip, to replace it with… New weatherstrip installed. Now, we see if it makes a difference…
I want to put a better bottom weather seal on this door, so I’ll need to cut off a bit of the bottom so it will fit and allow the door to close. I set up a jig to hopefully make a nice straight cut… Cut seemed successful. I applied some caulk… And then added […]
The glazing on this window needed a bit of touch up. So, once that was dry enough, it got a new coat exterior primer. Then, a new application of the door & trim paint.
Remaining strip of the new beadboard siding installed and painted. New beadboard installed in this area… Painting completed on this section. Painting completed on this section, as well.
Most of the new beadboard siding installed. The knot holes have been filled and sanded. This area still needs beadboard siding, as well… Patched up knot holes painted.
The new glazing, painted with the dark green exterior door paint (Woodford). Installed some new compression type weatherstrip around the door. How this portion of the wall looks with the back door painted. This area needs to be worked on next… Most of the new beadboard siding installed. The knot holes need to be filled.
Detail panels on outside of the door painted with the light green color (Northwest Trail). Inside, got a second coat of the regular dark green paint (Woodford). Detail frame panels on outside of the door painted with the dark purple color (Eggplant).