We found another piece of wall art, that matches the one we installed several years ago… This area of the wall seems like the perfect place for it… Marked where the holes should go… Then, drilled small pilot holes… Then, drilled bigger holes… And inserted the anchors… And, installed the piece… The silver screw heads […]
This last bit of old tile board never got removed when we redid the bathtub… May as well do it now… I just used a hammer and the 5-in1 tool… The back of the 5-in-1 tool just broke! Amazingly, the 5-in-1 tool still worked, and I was able to get the old tile board removed…
The adhesive is dry, so the wood braces were removed. Looks much better than it did. Here’s hoping it will last until we get the rest of the new tile board installed… The piece of old tile board has a few small nicks here and there. To help keep moisture from getting into the inner […]
This was a piece of the old tile board that we removed, and saved. It should work great as a new shower ceiling. I guess it pays to be a pack rat sometimes… The piece of old tile board, cut to the correct size. Construction adhesive was applied… Then, I used some thin wood strips […]
I’ll be installing this piece of cement board to replace the old plaster. The piece of cement board, cut to the correct size. The piece of cement board, being attached to the ceiling rafters with deck screws. The piece of cement board, installed.
The first thing that needs to go is this piece of 1×6 that is covering the seam of where the original wall used to run… Towels & drop cloth placed down, to try and prevent any damage if some of the plaster ceiling falls… I can’t remove the entire piece of wood, at this point, […]