Month: August 2012

I glued the rubber compression weatherstrip into the groove… The top overlaps the side piece to try and prevent leakage… Detail of the top weatherstrip…
This is all a learning process, so I’m going to start adding in weatherstripping, and hope that I’ve planned it all out correctly… I figure I need some sort of compression weatherstrip to act as a seal around the door opening. I found a rubber compression type of weatherstrip at Menards. It requires a thin […]
Installed the hinges to the backs of the new doors. The new door fronts were painted with the door & trim paint. After the paint was dry, the new doors were installed onto the new frame. Testing the functionality… Added the faux straps And, reproduction handles. Everything seems to work just fine…
Working on finishing up the support framing. I need to determine where the hinges will be mounted. The completed support framework… All of the inside edges of the door got a slight 45 degree cut with the router.
New base, painted with door & trim paint. Ready for the doors to be installed.
Projects At A Glance
  • Servant Quarters Chimney (1)
Archives
  • 2022 (32)
  • 2021 (76)
  • 2020 (99)
  • 2019 (19)
  • 2018 (53)
  • 2017 (35)
  • 2016 (62)
  • 2015 (80)
  • 2014 (72)
  • 2013 (34)
  • 2012 (123)
  • 2011 (95)
  • 2010 (46)
  • 2009 (86)
  • 2008 (84)
  • 2007 (59)
  • 2006 (61)
  • 2005 (127)
  • 2004 (185)
  • 2003 (168)
  • 2002 (43)
  • 2001 (28)