Last piece of door trim ready to have the old paint removed. Right after stripping the paint with the heat gun. Then, sanded. Because we switched the door swing, this piece of trim used to be on opening side. The edge of the trim is really rough. Most likely from having things rubbed across it […]
Found a bit of damage on the detail pieces while working on this side of the wall… Back side of the piece… Location of the damaged piece. Detail…
Back to the first section of wall, ready to start installing beadboard. Some beadboard installed. And, painted. The last piece of door frame extension strip cut… And, installed.
New fascia board painted with the light green color (Northwest Trail).
New fascia board installed and the nail holes all filled…
Ready to install the new fascia board… Putting in the final nails…
I got the other two vent holes cut… First vent grill, installed… The other two vent grills.