Month: May 2012

Side strip, installed… Detail of the door latch area.
Now for the side strip… Side strip cut. This piece needed a strange cut at the top… And it needed this part shaped to fit the door striker plate.
The old door frame isn’t wide enough to reach the frame parts… So, I’ll need to add some thin strips of wood to make up the difference. Here’s the piece for the top, installed.
Top door frame piece, with all of the old paint layers… All of the old paint, stripped off with the heat gun. And then sanded…
Cleaned and ready for insulation… Not a lot of room for insulation, but I managed to get some in. And, the next piece of wall board installed…
Cleaned out and ready for insulation. R-13 insulation added. Next section of wall board installed…
Projects At A Glance
  • Servant Quarters Chimney (1)
Archives
  • 2022 (32)
  • 2021 (76)
  • 2020 (99)
  • 2019 (19)
  • 2018 (53)
  • 2017 (35)
  • 2016 (62)
  • 2015 (80)
  • 2014 (72)
  • 2013 (34)
  • 2012 (123)
  • 2011 (95)
  • 2010 (46)
  • 2009 (86)
  • 2008 (84)
  • 2007 (59)
  • 2006 (61)
  • 2005 (127)
  • 2004 (185)
  • 2003 (168)
  • 2002 (43)
  • 2001 (28)